Dell OptiPlex 7080 Tower Service Manual - Page 38
Installing the memory modules, SD card reader (optional), Removing the SD card reader
![]() |
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the memory modules Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the memory modules and provides a visual representation of the installation procedure. Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. SD card reader (optional) Removing the SD card reader Prerequisites 1. Follow the procedure in before working inside your computer. 38 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7080-tower-service-manual-35d168f/38.png)