Dell OptiPlex GXi Service Manual (.pdf) - Page 107
Microprocessor/Heat Sink Assembly, follow these steps
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Microprocessor/Heat Sink Assembly heat sink front of computer microprocessor securing clip (hooks over tabs on the socket) microprocessor socket Figure 5-21. Microprocessor Securing-Clip Removal To remove the microprocessor/heat sink assembly, follow these steps: 1. Unlatch and rotate the power supply to the right (see Figure 5-12). 2. Remove the microprocessor securing clip from the microprocessor/heat sink assembly. WARNING: The microprocessor chip can get extremely hot during system operations. Be sure the chip has had sufficient time to cool before touching it. Press down on the folded part of the clip with a small screwdriver to release the clip. 3. Push outward and then upward on the microprocessor-socket release lever to rotate the lever to its fully vertical position (see Figure 5-22). 4. Lift the microprocessor/heat sink assembly out of its socket. Removing and Replacing Parts on the Midsize Chassis 5-21