Dell OptiPlex GXi Service Manual (.pdf) - Page 127
Expansion-Card Cage Removal
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Expansion Cards The computer has a removable expansion-card cage. The expansion-card cage contains the riser board and any installed expansion cards. Dell recommends that you remove the expansion-card cage first before removing or installing expansion cards. If you are not removing any of the expansion cards, leave the external cables attached to the expansion cards. Expansion-Card Cage chassis expansioncard cage back slot bottom slot lever Figure 6-16. Expansion-Card Cage Removal To remove an expansion-card cage, follow these steps: 1. Rotate the lever toward the back of the computer until it stops in the upright position. 2. Slide the expansion-card cage out of the computer. To replace an expansion-card cage, align the tabs on the left and right sides of the expansion-card cage with the slots on the back and bottom of the chassis. With the securing lever in its extended position, slide the expansion-card cage into place. Removing and Replacing Parts on the Mini Tower Chassis 6-17