Dell OptiPlex GXi Service Manual (.pdf) - Page 83
Microprocessor/Heat Sink Assembly, Microprocessor Securing-Clip Removal
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Microprocessor/Heat Sink Assembly heat sink front of computer microprocessor securing clip (hooks over tabs on the socket) microprocessor socket Figure 4-18. Microprocessor Securing-Clip Removal To remove the microprocessor/heat sink assembly, follow these steps: 1. Remove the microprocessor securing clip from the microprocessor/heat sink assembly. WARNING: The microprocessor chip can get extremely hot during system operations. Be sure the chip has had sufficient time to cool before touching it. Press down on the folded part of the clip with a small screwdriver to release the clip. 2. Push outward and then upward on the microprocessor-socket release lever to rotate the lever to its fully vertical position (see Figure 4-19). 3. Lift the microprocessor/heat sink assembly out of its socket. Removing and Replacing Parts on the Low-Profile Chassis 4-19