Dell OptiPlex GXi Service Manual (.pdf) - Page 65
Removing and Replacing Parts on the Low-Profile Ch..., Recommended Tools
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 4 Removing and Replacing Parts on the Low-Profile Chassis This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell OptiPlex GXi low-profile computer. If you are servicing a Dell OptiPlex GXi midsize or mini tower computer, use Chapter 5, "Removing and Replacing Parts on the Midsize Chassis," or Chapter 6, "Removing and Replacing Parts on the Mini Tower Chassis." Unless otherwise noted, each procedure assumes the following: • You have performed the steps in "Precautionary Measures" found later in this chapter. • You have removed the computer cover. • You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Recommended Tools Most of the procedures in this chapter require the use of one or more of the following tools: • Small flat-blade screwdriver • Wide flat-blade screwdriver • #1 and #2 Phillips-head screwdrivers • 1/4-inch nutdriver • Tweezers or long-nose pliers Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts on the Low-Profile Chassis 4-1