Dell OptiPlex GXi Service Manual (.pdf) - Page 39
Main Memory, System Board Jumpers, - memory upgrade
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Main Memory The four DIMM sockets on the system board can accommodate combinations of 8-, 16-, 32-, 64-, and 128-MB DIMMs up to a total memory capacity of 512 MB. Main memory can have either 72-bit parity (ECC) DIMMs or 64-bit nonparity DIMMs. The standard main memory is 16 MB of high-speed (60-ns) EDO-type memory with parity (ECC). The DIMMs can have different capacities, but must adhere to the following installation rules: • The memory can support any mixture of 8-, 16-, 32-, 64-, and 128-MB DIMMs. • The largest capacity DIMM must be in socket DIMM_A with decreasing capacities toward socket DIMM_D. • ECC function is enabled when all installed DIMMs are 72-bit parity DIMMs and the ECC category is set to On in the System Setup program. See the online System User's Guide or Chapter 6, "Installing System Board Options," in the Reference and Installation Guide for additional memory upgrade information. System Board Jumpers NICRST or jumpered unjumpered Figure 1-20. System Board Jumpers System Overview 1-21