Dell OptiPlex GXi Service Manual (.pdf) - Page 40
Table 1-2., System-Board Jumper Descriptions, NIC enable or
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Table 1-2. System-Board Jumper Descriptions Jumper Description Settings 100* Reserved Do not install jumper. 133 Microprocessor Install jumper if the microprocessor's speed internal speed is 133 MHz; otherwise the jumper should not be installed. 166 Microprocessor Install jumper if the microprocessor's speed internal speed is 166 MHz; otherwise the jumper should not be installed. 200 Microprocessor Install jumper if the microprocessor's speed internal speed is 200 MHz; otherwise the jumper should not be installed. 233 Microprocessor Install jumper if the microprocessor's speed internal speed is 233 MHz; otherwise the jumper should not be installed. PSWD Password enable or disable Install to enable the password feature. BIOS Reserved Do not install jumper. NICRST NIC enable or disable Service procedure only - Install jumper, then boot the computer to clear the NIC settings and reset the base address to 200h; then remove the jumper to allow configuration changes. * Not on all systems 1-22 Dell OptiPlex GXi Systems Service Manual