Dell OptiPlex GXi Service Manual (.pdf) - Page 89
Floor Stand, Floor Stand Removal
View all Dell OptiPlex GXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Floor Stand floor stand screw Figure 5-1. Floor Stand Removal To remove the floor stand, follow these steps: 1. Place the right side of the computer on a flat work surface. 2. Unscrew the floor stand screw. Use your fingers or a wide flat-blade screwdriver to unscrew the floor stand screw. 3. Pull the floor stand away from the computer. Disengage the three orientation nubs that position and help hold the floor stand to the computer. Removing and Replacing Parts on the Midsize Chassis 5-3
Removing and Replacing Parts on the Midsize Chassis
5-3
F
loor Stand
Figure 5-1.
Floor Stand Removal
To remove the floor stand, follow these steps:
1.
Place the right side of the computer on a flat work surface.
2.
Unscrew the floor stand screw.
Use your fingers or a wide flat-blade screwdriver to unscrew the floor stand
screw.
3.
Pull the floor stand away from the computer.
Disengage the three orientation nubs that position and help hold the floor
stand to the computer.
floor stand screw