Dell PowerConnect 5316M User's Guide - Page 66
Configuring an Initial Terminal Password, aaa authentication enable default line
View all Dell PowerConnect 5316M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
www.dell.com | support.dell.com NOTE: When creating a user name, the default priority is 1, which allows access but not configuration rights. A priority of 15 must be set to enable access and configuration rights to the Ethernet Switch Module. Although user names can be assigned privilege level 15 without a password, it is recommended to always assign a password. If there is no specified password, privileged users can access the Web interface with any password. Configuring an Initial Terminal Password To configure an initial terminal password, enter the following commands: console(config)# aaa authentication login default line console(config)# aaa authentication enable default line console(config)# line console console(config-line)# login authentication default console(config-line)# enable authentication default console(config-line)# password george • When initially logging on to a Ethernet Switch Module through a terminal session, enter george at the password prompt. • When changing a Ethernet Switch Module's mode to enable, enter george at the password prompt. Configuring an Initial Telnet Password To configure an initial Telnet password, enter the following commands: console(config)# aaa authentication login default line console(config)# aaa authentication enable default line console(config)# line telnet console(config-line)# login authentication default console(config-line)# enable authentication default console(config-line)# password bob • When initially logging onto a Ethernet Switch Module through a Telnet session, enter bob at the password prompt. • When changing a Ethernet Switch Module mode to enable, enter bob. Configuring an Initial SSH Password To configure an initial SSH password, enter the following commands: console(config)# aaa authentication login default line console(config)# aaa authentication enable default line 50 Starting and Configuring the Ethernet Switch Module