Dell PowerConnect Brocade M6505 Brocade 7.1.0 EZSwitchSetup Administrator's Gu - Page 9
Document Feedback
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• Detailed description of the problem, switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting steps already performed and results 2. Switch Serial Number The switch serial number and corresponding bar code are provided on the serial number label, as shown here: : *FT00X0054E9* FT00X0054E9 The serial number label is located as follows: • Brocade 300, 4100, 4900, 5000, 5100, 5300, 7800, 8000, and VA-40FC switches: On the switch ID pull-out tab located on the bottom of the port side of the switch. • Brocade 6505, 6510, and 6520 switches: On the switch ID pull-out tab located inside the chassis on the port side on the left. 3. World Wide Name (WWN) • The WWN is in the same place as the serial number. Document Feedback Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as possible about your comment, including the topic heading and page number and your suggestions for improvement. EZSwitchSetup Administrator's Guide ix 53-1002744-01