Dell PowerConnect W-6000 Installation Guide - Page 9
Pre-Installation Checklist
View all Dell PowerConnect W-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Chapter 2 Installing the Chassis CAUTION: Installation should be performed by a trained technician. This chapter covers the following installation topics: Precautions to observe during installation Requirements for W-6000 controller components and rack mounting gear Selecting a proper environment for the W-6000 controller Mounting the W-6000 controller in a rack Connecting power to the W-6000 controller Pre-Installation Checklist You will need the following during installation: Dell PowerConnect W-6000 Controller Dell PowerConnect W-6000 Controller rack mounting hardware (included) Phillips or cross-head screwdriver 19-inch equipment rack, or equivalent 3U rack space with 10 cm (4 inches) clearance to the left, right, front, and rear of the rack Another person to help position the W-6000 controller. One power cord for each power supply, rated to at least 10 A with IEC320 connector Adequate power supplies and electrical power (see "Power Management" on page 25) Cool, non-condensing air 0 to 40 ºC (32 to 104 ºF): may require air conditioning Console terminal with RJ-45 or DB-9 serial port RS-232 serial cable with RJ-45 male connectors A serial adapter (included) if connecting to the console with DB-9 Dell PowerConnect W-6000 Controller | Installation Guide Installing the Chassis | 9