Dell PowerConnect W Clearpass 100 Software Xirrus Array Integration Guide - Page 10
Amigopod Configuration
 |
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Amigopod Configuration The following configuration procedure assumes that the amigopod software or appliance has been powered up and a basic IP configuration has been applied through the setup wizard to allow the administrator to access the Web User Interface. The following table reviews the IP Addressing used in the test environment but this would be replaced with the site specific details of each customer deployment: Xirrus Array Address Internet Gateway Address amigopod IP Address amigopod RADIUS port 192.168.1.104 192.168.1.1 192.168.1.103 Auth 1812 Acc 1813 (default settings) Please refer to the amigopod Quick Start Guide for more information on the basic configuration of the amigopod software. CONFIDENTIAL 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
 |
 |
CONFIDENTIAL
10
Amigopod Configuration
The following configuration procedure assumes that the amigopod software or appliance has
been powered up and a basic IP configuration has been applied through the setup wizard to
allow the administrator to access the Web User Interface. The following table reviews the IP
Addressing used in the test environment but this would be replaced with the site specific details
of each customer deployment:
Xirrus Array Address
192.168.1.104
Internet Gateway Address
192.168.1.1
amigopod IP Address
192.168.1.103
amigopod RADIUS port
Auth 1812
Acc 1813 (default settings)
Please refer to the amigopod Quick Start Guide for more information on the basic configuration
of the amigopod software.