Dell PowerConnect W Clearpass 100 Software Xirrus Array Integration Guide - Page 4
Xirrus Array IP Address
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
The following table shows the software versions used during the integration testing. This document will be updated in the future if changes in either amigopod or Cisco subsequent releases affect the stability of this integration. It is advised that the customer always check for the latest integration guide available from either amigopod or Cisco. Dated Tested: AmigoPod Version: Plugins Required: Xirrus Array: Integration: April 2010 Kernel2.1, Radius Services 2.1 Standard build only System Software - 4.0.6 Build 1169 SCD Firmware - 2.21 Build 3157 Boot Loader - 1.0.0 Build 3090 IAP Driver - 1.5.0 Build 2036 HTTP Captive Portal Amigopod was deployed locally on the LAN interface of the Xirrus Array as a dedicated appliance. Amigopod VMWare image, or virtual appliance solution, can also be used successfully. Xirrus Array IP Address Internet Gateway Address amigopod IP Address amigopod RADIUS port 192.168.1.104 192.168.1.1 192.168.1.103 Auth 1812 Acc 1813 (default settings) The following diagram provides a high level overview of the test topology: CONFIDENTIAL 4