Dell PowerEdge C6145 Using the Baseboard Management Controller - Page 61
Extended Configurations - nic configuration
View all Dell PowerEdge C6145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Extended Configurations Table Error! No text of specified style in document.-25. Extended configurations Extended Configurations All strings are in P-String format. Configuration ID = 02h, NIC Attribute ID Size Description NicSelection 1 1 SharedNICSelection 2 1 Specifies the current mode of operation for the BMC network interface. 0: Shared NIC (default) 1: Dedicated NIC R/W This parameter is only valid when Attribute ID 1 NICSelection parameter is set to 0h as Shared NIC. 0h: Reserved (Recommend to set to 0h when NICSelection is set to Dedicated NIC.) 1h: NIC-1 (default) 2h: NIC-2 3h: NIC-3 4h: NIC-4 R/W Note: According to DCS I/O guide line, RJ45 connectors should be labeled starting from NIC-1. It also requires that Dedicated BMC NIC should always be the largest number (last port number). Therefore this Attribute ID parameter only requires to support the available Shared NIC numbers according to the labeled numbers, regardless of the NC-SI topology (i.e. Single Channel Dual Package IPMI OEM Command List | 61