Dell PowerEdge C6145 Using the Baseboard Management Controller - Page 65
DNS Dhcp Enable, Register BMC
View all Dell PowerEdge C6145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Account Status 4 1 Configuration ID = 06h, DNS Status of the account. This is the supplement to the byte 3 of response data of Get User Access command. Indexed by user ID. 00h = status is unspecified R I 01h = user ID is enabled via Set User Password 02h = user ID is disabled via Set User Password 03h = user ID is lockout Attribute ID Size Description DNS Dhcp Enable 1 1 Specifies that the DNS server IP addresses should be assigned from the DHCP server. 0: FALSE (default) 1: TRUE. R/W DNS Server1 2 4 Specifies the IP address for DNS server 1. This parameter is read-only if DNS Dhcp Enable and DHCP are enabled. R/W DNS Server2 3 4 Specifies the IP address for DNS server 2. This parameter is read-only if DNS Dhcp Enable and DHCP are enabled. R/W DNS Register BMC 4 1 Enables registering the BMC host name on the DNS server 0: FALSE (default) 1: TRUE. R/W DNS BMC Host Name 5 1..64 Specifies the DNS BMC host name. This parameter is read-only if DNS R/W Register BMC is set to TRUE. At least one IPMI OEM Command List | 65