Dell PowerEdge M520 Dell 10 Gb Ethernet Pass Through-k for M1000e So - Page 19
show port module
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
mismatch - both uplink and downlink are connected, but there is a mismatch 10G - uplink and downlink are connected at 10GbE • Downlink port link state: - down: blade not present - 10G: 10GbE link • Detailed downlink port link states (available in ADMIN level only): - 10G KR [AN]: 10GBASE-KR link; AN indicates that 802.3ap autonegotiation is active • Uplink port link state: - empty: No module present - module_type [no link]: Module is present (module type is shown); no link: optical fiber cable is disconnected Example: # show port link Port Group Connect Downlink Uplink Status 1 A (10G) 10G 10G SFP+ SR Link Up 2 A (10G) 10G 10G SFP+ SR Link Up 3 A (10G) 10G 10G SFP+ LR Link Up 4 A (10G) 10G 10G SFP+ SR Link Up 5 A (10G) 10G 10G SFP+ SR Link Up 6 A (10G) mismatch 10G SFP SX Link Down 7 A (10G) down down SFP+ SR Link Down 8 A (10G) down down empty 9 B (10G) mismatch 10G SFP SX Link Down 10 B (10G) mismatch 10G SFP SX Link Down 11 B (10G) mismatch 10G SFP SX Link Down 12 B (10G) mismatch 10G SFP LX Link Down 13 B (10G) down down empty 14 B (10G) down 10G SFP+ SR Link Down 15 B (10G) mismatch 1G SFP+ SR Link Down 16 B (10G) mismatch 1G SFP+ SR Link Down # # show port link 7 Port Group Connection Downlink Uplink Status 7 A (10G) down down SFP+ SR Link Down # 3.7.3 show port module Synopsys: show port module port_number Description: Show the transceiver module information for the specified uplink port. Rev 1.00 19