Dell PowerEdge M600 Web Tools Administrator’s Guide - Page 66

Configuring IP Filtering, Blade management, Enabling or disabling a blade

Page 66 highlights

3 Configuring IP Filtering DRAFT: BROCADE CONFIDENTIAL Configuring IP Filtering Web Tools provides the ability to control what client IP addresses may connect to a switch or fabric. Use the following procedure to set up IP Filtering. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 35. 2. Select the Security Policies tab. 3. Select IPFilter on the Security Policies menu. 4. Click Create Policy. The Create IP Filter Policy dialog box displays. 5. Enter a policy name, select a policy type, and then click the Add Rule button. 6. Enter the rule order and source IP address, and modify the service or destination port, protocol, and action as necessary. 7. Click OK. After you create a policy, you can use the following controls on this tab to manage the policies: • The Edit Policy button lets you select an existing policy and make changes to it. • The Show Policy button lets you view the details of the policy in a read-only window. • The Delete Policy button lets you delete a policy. • The Clone Policy button lets you copy a policy. Use this feature when you want to create similar policies. After you create a clone, you can edit the policy to make the appropriate changes. • The Activate Policy button lets you make an existing policy active. • The Distribute Policy button lets you distribute a policy to various switches. • The Accepts Distribution check box lets you set the policy to accept or reject distributions. Blade management Web Tools provides the ability to enable and disable blades, and to set slot-level IP addresses for blades. The procedure in this section applies only to the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms. Enabling or disabling a blade Use the following procedure to enable or disable a blade. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 35. 2. Select the Blade tab (Figure 15). 38 Web Tools Administrator's Guide 53-1001772-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310

38
Web Tools Administrator’s Guide
53-1001772-01
Configuring IP Filtering
3
DRAFT: BROCADE CONFIDENTIAL
Configuring IP Filtering
Web Tools provides the ability to control what client IP addresses may connect to a switch or fabric.
Use the following procedure to set up IP Filtering.
1.
Open the
Switch Administration
window as described in
“Opening the Switch Administration
window”
on page 35.
2.
Select the
Security Policies
tab.
3.
Select
IPFilter
on the
Security Policies
menu.
4.
Click
Create Policy
.
The
Create IP Filter Policy
dialog box displays.
5.
Enter a policy name, select a policy type, and then click the
Add Rule
button.
6.
Enter the rule order and source IP address, and modify the service or destination port,
protocol, and action as necessary.
7.
Click
OK
.
After you create a policy, you can use the following controls on this tab to manage the policies:
The
Edit Policy
button lets you select an existing policy and make changes to it.
The
Show Policy
button lets you view the details of the policy in a read-only window.
The
Delete Policy
button lets you delete a policy.
The
Clone Policy
button lets you copy a policy. Use this feature when you want to create
similar policies. After you create a clone, you can edit the policy to make the appropriate
changes.
The
Activate Policy
button lets you make an existing policy active.
The
Distribute Policy
button lets you distribute a policy to various switches.
The
Accepts Distribution
check box lets you set the policy to accept or reject distributions.
Blade management
Web Tools provides the ability to enable and disable blades, and to set slot-level IP addresses for
blades. The procedure in this section applies only to the Brocade 48000 and Brocade DCX and
DCX-4S enterprise-class platforms.
Enabling or disabling a blade
Use the following procedure to enable or disable a blade.
1.
Open the
Switch Administration
window as described in
“Opening the Switch Administration
window”
on page 35.
2.
Select the
Blade
tab (
Figure 15
).