Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.10.0 - Page 17
getmodinfo, getniccfg, getpbinfo
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
• Display all available configuration groups: racadm getconfig -h getmodinfo Description Synopsis Gets module configuration and status information. NOTE: If the Power Supply Unit (PSU) is absent, the RACADM interface displays the health state and power status for the PSU as N/A. racadm getmodinfo [-m ] Input Example -m-The must have one of the following values: • server--Where n = 1 to 8 • switch--Where n = 1 to 6 • mm- -Where n = 1, 2 • fan--Where n = 1 to 9 • ps- -Where n = 1 to 6 • storage--chassis • Display rollup status of all the modules in the chassis. racadm getmodinfo • Display status of fan module 3 in the chassis. racadm getmodinfo -m fan-3 getniccfg Description Synopsis Displays the network settings for modules. racadm getniccfg [-m ] Input Example -m-The must be one of the following values: • chassis-Default state if -m is not specified. • switch--Where n = 1-6 • Display switch network settings racadm getniccfg -m switch-1 • Display chassis network settings racadm getniccfg -m chassis getpbinfo Description Gets power budget status information. If there is no power supply to the PSU, the output of the command is displayed as Input Lost. If there is a mismatch in the power source, for example, a PSU of 220 Volts and PSU of 110 Volts are combined, then the output of the command is displayed as Configuration Error. RACADM sub command details 17