Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.10.0 - Page 23

Synopsis Input Example • powerdown-perform server power off • powerup-perform server power on • powercycle-perform server power cycle • hardreset-force hard server power reset • graceshutdown-perform graceful shutdown of server • reseat-perform a virtual reseat of a server/storage NOTE: This action requires -f option to force the action. • powerstatus-display current power status of server NOTE: This action is not allowed with -a option racadm serveraction -m racadm serveraction -a • -m-The must be server-, where n = 1 to 8 • -a-Performs power action on all servers • Power action on a single server: racadm serveraction -m server-1 powerdown • Power action on all servers: racadm serveraction -a powerup • Reseat action on a single storage: racadm serveraction -m storage-2 -f reseat setniccfg Description Synopsis Modifies network configuration properties. racadm setniccfg [-m ] -d racadm setniccfg [-m ] -s Input racadm setniccfg [-m ] -v [vlan_id] • -m-The option must be one of the following values: • switch-, where n = 1-6 • chassis-The default state if -m is not specified. • -d-Enables DHCP for the Ethernet management port. • -s-Enables static IP address, netmask, and gateway settings. NOTE: • Enter the IP address, netmask, and gateway as dotted decimal strings. • Command also supports VLAN Configuration. • -v-VLAN settings has the following legal values: • If there are no arguments, it implies that the VLAN tag must be removed. • : 1-4000, 4021-4094 NOTE: Disable the DHCP option to configure the static IP. RACADM sub command details 23