Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.00.1 - Page 10

arp Description Synopsis Input Example Displays the networking ARP table. racadm arp racadm arp Table 4. racadm arp Address 192.168.0.120 192.168.1.120 192.168.0.121 HWtype ether ether ether HWaddress 00:00:5e:00:01:01 90:b1:1c:f4:32:09 90:b1:1c:f4:34:f4 Flags Mask C C C Iface pub pub pub chassisaction Description Synopsis Input Executes the turn on, turn off, power cycle, or reset operation. racadm chassisaction [-m ] • -m-Must be one of the following values: - chassis-Default state if -m is not specified. - switch--Where n=1-6 • -Must be one of the following values: - powerdown-Graceful shutdown of the module. - powerup-Turns on the module. - powercycle-Power cycles the module. - nongraceshutdown-Non-graceful shutdown of the module. - reset-Hard reset of the management module. NOTE: The valid options for are powercycle and reset. Example • Perform a reset of switch-2 racadm chassisaction -m switch-2 reset • Perform a powercycle of switch-1 racadm chassisaction -m switch-1 powercycle • Perform a non-graceful shutdown of the chassis racadm chassisaction -m chassis nongraceshutdown chassisgroup Description Approves or rejects the chassis addition requests. You can also use this command to view the chassis group details. Supported options are: 10 RACADM sub command details