Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.00.1 - Page 20

Synopsis racadm ping6 Input Example -The IPv6 address of the remote endpoint to ping. To ping ipaddress FE80:0000:0000:0000:0202:B3FF:FE1E:8329 racadm ping6 FE80:0000:0000:0000:0202:B3FF:FE1E:8329 racreset Description Synopsis Resets the RAC. racadm racreset racresetcfg Description Synopsis Restores the RAC configuration to factory defaults. racadm racresetcfg Running the racresetcfg command results in the following: • Clears Management Module Configuration and resets to Initial settings. • Rediscovers iDRAC. NOTE: iDRAC discovery may take longer, as the Chassis may not receive the MDNS message from iDRAC immediately. • Removes the MCM grouping functionality. NOTE: The reset_config, reset_all, racresetcfg, FIPS_MODE ON/OFF workflow clear the database and the user information is not retained. Hence, configuration restoration is logged in DELL_INTERNAL_PROCESS. NOTE: If the member chassis undergoes a factory reset, it becomes a stand-alone chassis and not a member of the multi-chassis group. You can remove the member from the lead chassis. serveraction Description Synopsis Manages the server or storage power. Supported actions are: • powerdown-perform server power off • powerup-perform server power on • powercycle-perform server power cycle • hardreset-force hard server power reset • graceshutdown-perform graceful shutdown of server • reseat-perform a virtual reseat of a server/storage NOTE: This action requires -f option to force the action. • powerstatus-display current power status of server NOTE: This action is not allowed with -a option racadm serveraction -m racadm serveraction -a 20 RACADM sub command details