Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.00.1 - Page 28

Input cfgConnectedSlots= Example cfgConnectedSlots=2,2,2,2,2,2,2,2 cfgUserAdmin Description This group provides configuration information about the users who are allowed to access management module through the available remote interfaces. Up to 64 instances of the user group are allowed. Each instance represents the configuration for an individual user. NOTE: In the current management module firmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are interrelated; changing the value of one property causes the value of the other property to change. For example, if a user does not have login privilege, the user is disabled by default. When you enable the user by changing the value of the UserAdminEnable to 1, the right-most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change the right-most digit of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0. Use this object with the config or getconfig subcommands. To use the command as follows: -i , supply an index group number. To use this object property, you must have the Chassis Configuration Administrator privilege. NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable object, use the -o option. cfgUserAdminPassword - Write Only Description The password for this user. User passwords are encrypted and cannot be seen or displayed after the property is written. Legal Values A string of up to 20 ASCII characters. Default ******** cfgRacTuning This group is used to configure various iDRAC or OME - Modular configuration properties, such as valid ports and security port restrictions. Use this object with the config or getconfig subcommands. To use this object property for OME - Modular, you must have the Chassis Configuration Administrator privilege. NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable object, use the -o option. Use the -m option to apply this setting to OME - Modular. 28 OME Modular property database group and object descriptions