Dell PowerEdge PDU Metered LCD User Manual - Page 17
Removing the Rear Side Panel, the slot on the rack PDU tray.
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Removing the Rear Side Panel 1 Remove the screws (2) holding the rear side panel in place from inside the rack. 2 Lift the rear side panel up and away from the rack. Replacing the Rear Side Panel 1 Insert the alignment bracket located in the middle of the rear panel into the slot on the rack PDU tray. 2 Install screws at the top and bottom to secure the rear side panel. Figure 1-6. Replacing the Rear Side Panels 1 2 3 1 rear side panel 3 alignment bracket 4 2 screw (2) 4 slot in PDU tray Installation Guide 15
![](/manual_guide/products/dell-poweredge-2410-4ec43ad/17.png)
Installation Guide
15
Removing the Rear Side Panel
1
Remove the screws (2) holding the rear side panel in place from inside the rack.
2
Lift the rear side panel up and away from the rack.
Replacing the Rear Side Panel
1
Insert the alignment bracket located in the middle of the rear panel into
the slot on the rack PDU tray.
2
Install screws at the top and bottom to secure the rear side panel.
Figure 1-6.
Replacing the Rear Side Panels
1
rear side panel
2
screw (2)
3
alignment bracket
4
slot in PDU tray
1
3
4
2