Dell PowerEdge PDU Metered LCD User Manual - Page 22
Reinstall the lock catch on the other rack front vertical frame member
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6 Replace the front door by reversing the steps in "Removing the Front Door" on page 8. 7 Reverse the lock catch. a Unscrew the two Phillips screws that hold the lock catch to the vertical frame member. b Remove the lock catch and rotate it 180 degrees. c Reinstall the lock catch on the other rack front vertical frame member by aligning the holes of the catch with the holes of the frame member and then reinserting the two Phillips screws. See Figure 1-10. 20 Installation Guide
20
Installation Guide
6
Replace the front door by reversing the steps in "Removing the Front
Door" on page 8.
7
Reverse the lock catch.
a
Unscrew the two Phillips screws that hold the lock catch to the vertical
frame member.
b
Remove the lock catch and rotate it 180 degrees.
c
Reinstall the lock catch on the other rack front vertical frame member
by aligning the holes of the catch with the holes of the frame member
and then reinserting the two Phillips screws. See Figure 1-10.