Dell PowerEdge PDU Metered LCD User Manual - Page 27
align its holes with the corresponding holes in the frame., Use the provided bolts, washers
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the Front Stabilizer Feet 1 Open the front door. 2 Reach into the rack and pull up firmly on each stabilizer to detach them from the frame. 3 Remove the plastic fasteners attached to the stabilizer feet. 4 Position each front stabilizer foot against the base of the rack frame and align its holes with the corresponding holes in the frame. 5 Use the provided bolts, washers, and cage nuts to secure each foot to the rack as shown in Figure 1-13. Figure 1-13. Installing the Front Stabilizer Feet 1 1 front stabilizer foot (2) Installation Guide 25
Installation Guide
25
Installing the Front Stabilizer Feet
1
Open the front door.
2
Reach into the rack and pull up firmly on each stabilizer to detach them
from the frame.
3
Remove the plastic fasteners attached to the stabilizer feet.
4
Position each front stabilizer foot against the base of the rack frame and
align its holes with the corresponding holes in the frame.
5
Use the provided bolts, washers, and cage nuts to secure each foot to the
rack as shown in Figure 1-13.
Figure 1-13.
Installing the Front Stabilizer Feet
1
front stabilizer foot (2)
1