Dell PowerEdge PDU Metered LCD User Manual - Page 28
holes with the corresponding holes in the frame
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the Side Stabilizer Feet 1 Remove the lower side panels (see "Removing the Lower Side Panels" on page 13). 2 On the side of the rack frame's bottom rail, locate the four holes (see Figure 1-14). 3 Position each stabilizer foot against the base of the rack frame and align its holes with the corresponding holes in the frame. Figure 1-14. Installing the Side Stabilizer Feet 1 1 side stabilizer foot (2 per side) 4 Use the provided bolts, washers, and cage nuts to secure each foot to the rack as shown in Figure 1-14. 26 Installation Guide
26
Installation Guide
Installing the Side Stabilizer Feet
1
Remove the lower side panels (see "Removing the Lower Side Panels" on
page 13).
2
On the side of the rack frame’s bottom rail, locate the four holes
(see Figure 1-14).
3
Position each stabilizer foot against the base of the rack frame and align its
holes with the corresponding holes in the frame.
Figure 1-14.
Installing the Side Stabilizer Feet
4
Use the provided bolts, washers, and cage nuts to secure each foot to the
rack as shown in Figure 1-14.
1
side stabilizer foot (2 per side)
1