Dell PowerEdge PDU Metered LCD User Manual - Page 34
Coupling Two Racks
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Coupling Two Racks WARNING: Because of the size and weight of the rack cabinets, never attempt to couple two rack cabinets by yourself. 1 Unpack and set up both racks. 2 Unpack the coupling kit, shown in Figure 1-19. The contents of the rack coupling kit include: • One gasket strip • Four coupling brackets Figure 1-19. Rack Coupling Kit 2 1 1 gasket strip 2 coupling bracket (4) 3 Remove the doors and side panels from both racks. See "Removing the Front Door" on page 9, "Opening and Removing the Back Doors" on page 10, and "Removing and Replacing the Side Panels" on page 12. 4 Cut and place a segment of the gasket strip, with its protective backing removed, on one of the racks along the frame surface to be in contact with the adjacent rack (see Figure 1-20). NOTE: It does not matter on which rack you place the gasket strip segments, as long as they protect both racks from being scratched. 32 Installation Guide
![](/manual_guide/products/dell-poweredge-2410-4ec43ad/34.png)