Dell PowerEdge PDU Metered LCD User Manual - Page 18
Reversing the Front Door (Optional), To reverse the direction that the front door opens
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Reversing the Front Door (Optional) NOTE: Use a 4-mm Allen wrench to remove the front-door hinge bodies from the rack and reinstall them on the side opposite their original positions. You might need a stepladder in order to access the Allen bolt that secures the top hinge body to the rack. To reverse the direction that the front door opens, complete the following steps: 1 Remove the front door (see "Removing the Front Door" on page 8). 2 Remove the side panels (see "Removing and Replacing the Side Panels" on page 12). 3 Reverse the top hinge body. a Pull the hinge pin slightly upward so that you can access the retention clip (see Figure 1-7). b Using the needle-nose pliers, remove the retention clip, and slide the hinge pin out of the hinge body. 16 Installation Guide
![](/manual_guide/products/dell-poweredge-2410-4ec43ad/18.png)