Dell PowerEdge PDU Metered LCD User Manual - Page 21
on the other side of the hinge body see
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
i Insert the hinge pin into the hinge body. j Insert the retention clip through the hinge so that the retention clip is below the spring. 4 Reverse the bottom hinge body. a Remove the Allen bolts that secure the hinge body to the rack, and place the bolts in a safe location. b Rotate the hinge body 180 degrees so that the hinge posts are now on the other side of the hinge body (see Figure 1-8). c Locate the bottom bolt holes in the right side of the rack, and use the Allen bolts to fasten the hinge body to the right side of the rack. 5 Rotate the front door 180 degrees so that its hinge-pin housings are on the right side (see Figure 1-9). Figure 1-9. Rotate the Front Door Installation Guide 19
![](/manual_guide/products/dell-poweredge-2410-4ec43ad/21.png)
Installation Guide
19
i
Insert the hinge pin into the hinge body.
j
Insert the retention clip through the hinge so that the retention clip
is below the spring.
4
Reverse the bottom hinge body.
a
Remove the Allen bolts that secure the hinge body to the rack,
and place the bolts in a safe location.
b
Rotate the hinge body 180 degrees so that the hinge posts are now
on the other side of the hinge body (see Figure 1-8).
c
Locate the bottom bolt holes in the right side of the rack, and use the
Allen bolts to fasten the hinge body to the right side of the rack.
5
Rotate the front door 180 degrees so that its hinge-pin housings are on the
right side (see Figure 1-9).
Figure 1-9.
Rotate the Front Door