Dell PowerEdge PDU Metered LCD User Manual - Page 19
retention clip, and body spring., Rotate the hinge body 180 degrees so that the hinge-pin holes are
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Figure 1-7. Removing the Front-Door Hinges 1 6 2 5 4 3 1 hinge pin 3 bottom hinge 5 retention clip 2 top hinge 4 hinge post 6 body spring c Remove the hinge spring from the hinge body. d Place the hinge pin, retention clip, and spring in a safe location. e Using the 4-mm Allen wrench, remove the Allen bolts that secure the hinge body to the rack, and place the bolts with the hinge pin, retention clip, and body spring. f Rotate the hinge body 180 degrees so that the hinge-pin holes are now on the right side of the hinge body (see Figure 1-8). Installation Guide 17
![](/manual_guide/products/dell-poweredge-2410-4ec43ad/19.png)
Installation Guide
17
Figure 1-7.
Removing the Front-Door Hinges
c
Remove the hinge spring from the hinge body.
d
Place the hinge pin, retention clip, and spring in a safe location.
e
Using the 4-mm Allen wrench, remove the Allen bolts that secure the
hinge body to the rack, and place the bolts with the hinge pin,
retention clip, and body spring.
f
Rotate the hinge body 180 degrees so that the hinge-pin holes are
now on the right side of the hinge body (see Figure 1-8).
1
hinge pin
2
top hinge
3
bottom hinge
4
hinge post
5
retention clip
6
body spring
1
6
5
2
3
4