Dell PowerEdge R415 Hardware Owner's Manual - Page 65
PCI IRQ Assignments Screen, Serial Communication Screen, On without Console Redirection
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Option OS Watchdog Timer (Disabled default) Embedded Video Controller (Enabled default) Description Aids recovery of the operating system, if your system stops responding. If set to Enabled, the operating system is allowed to initialize the timer. Enables or disables BIOS support for the Embedded Video Controller. PCI IRQ Assignments Screen Option Description Use the and keys to manually select an IRQ for a given device, or select Default to allow the BIOS to select an IRQ value at system startup. Serial Communication Screen Option Serial Communication (On without Console Redirection default) Serial Port Address (Serial Device 1=COM1, Serial Device2=COM2 default) External Serial Connector (Serial Device1 default) Description Selects whether the serial communication devices (Serial Device 1 and Serial Device 2) are enabled in BIOS. BIOS console redirection can also be enabled and the port address used can be specified. Options are On without Console Redirection, On with Console Redirection via COM1, On with Console Redirection via COM2, and Off. Sets the serial port addresses for the two serial devices. NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use console redirection by SOL, configure the same port address for console redirection and the serial device. Specifies whether Serial Device 1, Serial Device 2, or Remote Access Device has access to the external serial connector. NOTE: Only Serial Device 2 can be used for SOL. To use console redirection by SOL, configure the same port address for console redirection and the serial device. Using the System Setup Program and UEFI Boot Manager 65