Dell PowerEdge SC1435 Rack Installation Guide - Page 17
Installing the Mounting Rails in the Rack, Installing RapidRails Mounting Rails
View all Dell PowerEdge SC1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the Mounting Rails in the Rack NOTE: The following instructions apply to both sliding mounting rails and static mounting rails. Installing RapidRails Mounting Rails 1 At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange fits between the marks or tape you placed (or numbered locations) on the vertical rails in "Marking the Rack" (see Figure 1-7). The top mounting hook on the front mounting-bracket flange should enter the top hole between the marks you made on the vertical rails. Figure 1-7. Installing RapidRails Mounting Rails 1 2 3 front of rack 1 mounting hooks (2) 2 push buttons (2) 3 mounting rails (2) Four-Post Rack Installation 15
Four-Post Rack Installation
15
Installing the Mounting Rails in the Rack
NOTE:
The following instructions apply to both sliding mounting rails and static mounting rails.
Installing RapidRails Mounting Rails
1
At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange
fits between the marks or tape you placed (or numbered locations) on the vertical rails in "Marking the
Rack" (see Figure 1-7).
The top mounting hook on the front mounting-bracket flange should enter the top hole between the
marks you made on the vertical rails.
Figure 1-7.
Installing RapidRails Mounting Rails
1
mounting hooks (2)
2
push buttons (2)
3
mounting rails (2)
front of rack
1
2
3