Dell PowerEdge SC1435 Rack Installation Guide - Page 22
Installing a System With Static Rails, Secure both thumbscrews on the front panel of the chassis.
View all Dell PowerEdge SC1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing a System With Static Rails To install the system on the rack, perform the following procedure: 1 From the front of the system, lift the chassis into position so that the chassis rail modules are aligned with the mounting rails on the rack. 2 Push the chassis back into the mounting rails until the system stops (see Figure 1-10). 3 Secure both thumbscrews on the front panel of the chassis. 4 Install the optional front bezel (if applicable). See the procedures for installing the bezel in the documentation provided with your system. Figure 1-10. Installing a System With Static Rails 4 1 3 1 mounting rails (2) 4 release latches (2) 2 chassis rail modules (2) 20 Four-Post Rack Installation 2 3 thumbscrews (2)
20
Four-Post Rack Installation
Installing a System With Static Rails
To install the system on the rack, perform the following procedure:
1
From the front of the system, lift the chassis into position so that the chassis rail modules are aligned
with the mounting rails on the rack.
2
Push the chassis back into the mounting rails until the system stops (see Figure 1-10).
3
Secure both thumbscrews on the front panel of the chassis.
4
Install the optional front bezel (if applicable). See the procedures for installing the bezel in the
documentation provided with your system.
Figure 1-10.
Installing a System With Static Rails
1
mounting rails (2)
2
chassis rail modules (2)
3
thumbscrews (2)
4
release latches (2)
1
3
4
2