Dell PowerEdge SC1435 Rack Installation Guide - Page 36
Holding the left mounting rail at the location you marked, position the flush-mount mounting flange
View all Dell PowerEdge SC1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 Remove the bracket and then place the bracket on either the 7.62-cm or 15.24-cm (3-inch or 6-inch) wide flush-mount threaded studs (see Figure 2-5). 4 Using the two nuts that you removed in step 2, tighten the nuts finger tight to secure the adjustable mounting bracket (see Figure 2-5). 5 Repeat step 2 through step 4 to configure the other mounting rail. Figure 2-5. Configuring the Adjustable Mounting Bracket for Flush-Mount Installation 1 2 4 3 1 nuts (2 per bracket) 2 adjustable mounting bracket 3 7.62-cm (3-inch) wide, flushmount, threaded studs 4 flush-mount mounting flange 6 Holding the left mounting rail at the location you marked, position the flush-mount mounting flange against the front of the vertical two-post rack and secure it to the two-post rail with two 12-24 x 0.5-inch pan-head Phillips screws (see Figure 2-6). 34 Two-Post Rack Installation