Dell PowerStore 1200T EMC PowerStore Planning Guide - Page 8
Once the appliance arrives, Once you have completed initial configuration
![]() |
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Once the appliance arrives: See the PowerStore Quick Start Guide in the box to: 1. Unbox and install your appliance (base enclosure and expansion enclosures). 2. Connect the enclosures to the network, and power up. 3. Start the initial configuration process. For more information, see the PowerStore Networking Guide for PowerStore T Models or PowerStore Networking Guide for PowerStore X Models. The PowerStore Installation and Service Guide also includes installation instructions for later reference. NOTE: Either during the initial configuration process or once you log on to PowerStore Manager, it is strongly recommended that you enable the Support Connectivity feature to accelerate problem diagnosis, perform troubleshooting, and help speed time to resolution. For more information, see Support Connectivity on page 18. Once you have completed initial configuration: 1. Log in to PowerStore Manager using the administrator credentials you set up during initial configuration. 2. Configure settings for your cluster and start provisioning PowerStore Manager user accounts, storage resources, and policies. See the PowerStore Setting Up PowerStore Manager Guide for more information about the recommended steps when you log in to the PowerStore Manager for the first time. 8 Introduction
![](/manual_guide/products/dell-powerstore-1200t-emc-powerstore-planning-guide-dfb73b9/8.png)