Dell PowerSwitch S4112F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 49
CLI options
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
• Data Read-Reads transactions similar to the Address Read test, but focuses on the data bits. Patterns are placed on the data bus to test for stuck data bits. • Data Write-Places data patterns on the bus for testing the bus and looks for stuck data bits. • Data Walking 1-Walks a 1 through the data bits within an address location and verifies that the values are valid before overwriting. • Data Walking 0-Walks a 0 through the data bits and verifies the value as it is testing. • Data Sliding 1-Slides a 1 through the data testing for stuck bits. By xor of each shift to the data, when complete, the cell holds all the 1s. • Data Sliding 0-Slides a 0 through the data bits set to 1. By xor of each shift of the data, when complete, the cell holds all the 1s. • Data Pattern-Writes four different patterns to memory locations within the specified region. The patterns are 0xFFFF, 0xFF00, 0xF0F0, 0xAAAA, 0xAA55 and 0x5555. The patterns are written as repeated portions of these patterns in the memory to fill the memory and as Hamming patterns (such as Hamming [8,4], Hamming[16,11], Hamming[32,26] or Hamming[64,57]) encoding with the additional most significant byte (MSB) parity bit to cover the parity bits in the Hamming code. This pattern allows for detecting multiple bit errors. • Data Cache-Performs a rotation of a 16MB array in four clockwise rotations for 16 iterations of the complete rotation. The 16MB size ensures that memory is not within the cache lines and causes cache ejections through each of the rotations. CLI options DellEmc Diag - Memory Tool version 1.5, x.xx.x.x-x build, 2017/05/23, Syntax: memtool Show the Help-text:= memtool --h (or) memtool -h Display the configuration info of the device:= memtool --info (or) memtool -i List all of the memory regions in the config file:= memtool --list (or) memtool -l Test using the MEM test config file:= memtool --test --region= [--testlist=,...] (or) memtool -t -G [-T ,,...] Read the specified physical address:= memtool --read --addr= --count= [--width=] (or) memtool -r -a -C [-W ] Write at the specified physical address:= memtool --write --addr= --val=,, ... , [--width=] (or) memtool -w -a -V ,..., [-W ] Execute repeatedly command by count:= memtool --iteration=max/ [option1] [option2]... (or) memtool -I max/ [option1] [option2]... Usage:= -h, --h Show the help text -t, --test Test using the pre-programmed configuration or use supplied config -i, --info Configuration information -l, --list List the understood TLV codes and names -G, --region Region -T, --testlist List of tests -I, --iteration= Iteration command execution -C, --count= Count -a, --addr= Address -r, --read Read operation -w, --write Write operation -V, --val= Value to be set -W, --width Width {8,16} Available Tests are: Dell EMC DAIG-OS tools 49