Dell PowerSwitch S4112F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 67
D3COLD WakeUp capability advertisement, Set the Offset
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
phytool --write --offset= --val= (or) phytool -w -o -V Dump the eeprom contents:= phytool --eeprom-dump (or) phytool -x Dump the register contents:= phytool --reg-dump (or) phytool -d Phy loopback test:= phytool --lb-test[=no of packets] (or) phytool -l[=no of packets] Execute repeatedly command by count:= phytool --iteration=max/ [option1] [option2]... (or) phytool -I max/ [option1] [option2]... Set the interface with parameters:= phytool --set-intf --speed= --duplex= --autoneg (or) phytool -s -S -D -A Show the interface settings:= phytool --show-intf (or) phytool -a Usage:= -h, --h Show the help text -I, --iteration= Iteration command execution -R, --read-mac Read the MAC of the interface -w, --write Write operation -o, --offset Set the Offset -V, --val Value to be set -x, --eeprom-dump Dump the eeprom contents -d, --reg-dump Dump the register contents -l, --lb-test= Phy loopback test -s, --set-intf Set the interface with parameters -S, --speed= Speed -D, --duplex= Duplex mode -A, --autoneg= Auto-negotiation -a, --show-intf Show the interface settings Output root@dellemc-diag-os:/etc/dn/diag# phytool --read-mac 34:17:eb:07:7c:00 root@dellemc-diag-os:/etc/dn/diag# phytool --eeprom-dump Offset Values ------ ------ 0x0000: 34 17 eb 07 7c 00 00 08 ff ff 05 10 ff ff ff ff 0x0010: 18 00 00 00 2f 40 41 1f 86 80 41 1f 86 80 80 ba 0x0020: ff ff ff ff 80 5c 47 00 00 00 40 00 00 4c ab 03 0x0030: 00 00 00 70 0e 1a 26 44 a3 07 42 1f 01 02 02 06 0x0040: 0c 00 47 21 00 00 ff ff ac 44 f6 00 44 1f 08 09 0x0050: 40 04 3c 00 00 00 04 14 00 00 00 00 00 10 ff ff 0x0060: 00 01 00 40 32 13 13 40 00 01 00 40 ff ff b0 03 0x0070: 00 01 00 40 00 01 00 40 d9 09 bc 03 ff ff b5 7e 0x0080: ff ff ff ff a5 0b 00 80 ff ff ff ff ff ff ff ff ..... root@dellemc-diag-os:/etc/dn/diag# phytool --reg-dump 0x00000: CTRL (Device control register) Invert Loss-Of-Signal: Receive flow control: Transmit flow control: VLAN mode: Set link up: D3COLD WakeUp capability advertisement: Auto speed detect: Speed select: Force speed: 0x08100241 no enabled disabled disabled 1 enabled disabled 1000Mb/s no Dell EMC DAIG-OS tools 67