Dell PowerSwitch S4112F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 84
bonnie
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
-f FORMAT, --format=FORMAT Set output format for attributes: old, brief, hex[,id|val] (ATA) -l TYPE, --log=TYPE Show device log. TYPE: error, selftest, selective, directory[,g|s], xerror[,N][,error], xselftest[,N][,selftest], background, sasphy[,reset], sataphy[,reset], scttemp[sts,hist], scttempint,N[,p], scterc[,N,M], devstat[,N], ssd, gplog,N[,RANGE], smartlog,N[,RANGE] -v N,OPTION , --vendorattribute=N,OPTION Set display OPTION for vendor Attribute N (see man page) (ATA) -F TYPE, --firmwarebug=TYPE (ATA) Use firmware bug workaround: none, nologdir, samsung, samsung2, samsung3, xerrorlba, swapid -P TYPE, --presets=TYPE Drive-specific presets: use, ignore, show, showall (ATA) -B [+]FILE, --drivedb=[+]FILE Read and replace [add] drive database from FILE [default is +/usr/etc/smart_drivedb.h and then /usr/share/smartmontools/drivedb.h] (ATA) DEVICE SELF-TEST OPTIONS ===== -t TEST, --test=TEST Run test. TEST: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] -C, --captive Do test in captive mode (along with -t) -X, --abort Abort any non-captive test on device SMARTCTL EXAMPLES ===== smartctl --all /dev/hda (Prints all SMART information) smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda (Enables SMART on first disk) smartctl --test=long /dev/hda (Executes extended disk self-test) smartctl --attributes --log=selftest --qu MODE, --nocheck=MODE (ATA) No check if: never, sleep, standby, idle (see man page DEVICE FEATURE ENABLE/DISABLE COMMANDS ===== bonnie++ bonnie++ is a test suite for storage devices that runs more comprehensive tests than the standard file system tests using the storagetool. You can run bonnie++ outside of the storagetool, but for logging purposes, use bonnie++ within storagetool. root@dell-diag-os:/opt/dellemc/diag/bin# bonnie++ You must use the "-u" switch when running as root. usage: bonnie++ [-d scratch-dir] [-s size(Mb)[:chunk-size(b)]] [-n number-to-stat[:max-size[:min-size][:num-directories]]] [-m machine-name] [-r ram-size-in-Mb] [-x number-of-tests] [-u uid-to-use:gid-to-use] [-g gid-to-use] [-q] [-f] [-b] [-p processes | -y] 84 Dell EMC DAIG-OS tools
![](/manual_guide/products/dell-powerswitch-s4048ton-open-networking-hardware-diagnostic-guide-2019-eb1bdf1/84.png)