Dell PowerSwitch S4112F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 78
smbiostool, CLI options
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table 1. SmartFusion FPGA registers Offset 0x200 Name SMF_VER Description SmartFusion FPGA version register Figure 13. Get current FPGA version 4 Upgrade the FPGA in smartFusion using the # ./smarttool -uf /dev/ttyS0 / _SMF_logic_v0.E.dat command. To upgrade to region A, you must be in region G. The device automatically reboots after the upgrade. Figure 14. Upgrade FPGA 5 Verify that the FPGA is upgraded using the lpctool utility. Get the FPGA running image version through the ./lpctool --read --addr=0x200 --size=b registers of the LPC tool. smbiostool The smbiostool displays information about the BIOS and also reprograms the BIOS flash. NOTE: The smbiostool is not available for all platforms. For some platforms, this tool is replaced with the updatetool. CLI options DellEmc Diag - SMBIOS Tool version 1.2, x.xx.x.x-x build, 2017/05/23, Usage:= 78 Dell EMC DAIG-OS tools
![](/manual_guide/products/dell-powerswitch-s4048ton-open-networking-hardware-diagnostic-guide-2019-eb1bdf1/78.png)