Dell PowerSwitch S4112F-ON Open Networking Hardware Diagnostic Guide April 201 - Page 77
Upgrading SMF FPGA, registers at the LPC tool.
![]() |
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 10. Check MSS upgrade Upgrading SMF FPGA To upgrade your system using the FPGA method, follow these steps. 1 Copy all the binaries needed for upgrade into a local directory. Figure 11. Copy needed binaries 2 Check the FPGA region using smarttool -gfr /dev/ttyS0 command. Figure 12. Check FPGA region 3 Get the current version of the FPGA using the lpctool utility. Get the FPGA running image version through the ./lpctool -read --addr=0x200 --size=b registers at the LPC tool. Dell EMC DAIG-OS tools 77
![](/manual_guide/products/dell-powerswitch-s4048ton-open-networking-hardware-diagnostic-guide-2019-eb1bdf1/77.png)
Figure 10. Check MSS upgrade
Upgrading SMF FPGA
To upgrade your system using the FPGA method, follow these steps.
1
Copy all the binaries needed for upgrade into a local directory.
Figure 11. Copy needed binaries
2
Check the FPGA region using
smarttool –gfr /dev/ttyS0
command.
Figure 12. Check FPGA region
3
Get the current version of the FPGA using the
lpctool
utility. Get the FPGA running image version through the
./lpctool --
read --addr=0x200 --size=b
registers at the LPC tool.
Dell EMC DAIG-OS tools
77