Dell PowerSwitch S5212F-ON S5200-ON Series BMC User Guide March 2019 - Page 22
Data 1:-Protocol TCP and UDP, Flush IPv4 and IPv6 iptable
![]() |
View all Dell PowerSwitch S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Parameter # Remove the IPv4 port number rule 6 Remove the IPv4 port range rule 7 Flush IPv4 and IPv6 iptable 8 Drop all 9 Remove drop all rule 10 Add IPv4 address with timeout rule 11 22 Configuration methods Parameter data 4th byte = x4 Data 1:-Protocol TCP/UDP 0 = TCP 1 = UDP 2 = both TCP and UDP Data 2:3-port number [2:3]-Port number from the ports blocked or unblocked based on the state. Data 1:-Protocol TCP and UDP 0 = TCP 1 = UDP 2 = both TCP and UDP Data 2:5-port range [2:3]-Port number from the ports blocked or unblocked based on the state. [4:5]-Port number till ports are blocked or unblocked based on the state. Flush all the rules set using iptables and ip6tables. Add iptables rules to block IPv4 and IPv6 traffic to the BMC. The state selector is not used. Data1: Protocol Bit 7:2-Reserved Bit 1-IPv6 Bit 0-IPv4 Remove iptables rules to block IPv4 and IPv6 traffic to the BMC. The state selector is not used. Data1: Protocol Bit 7:2-Reserved Bit 1-IPv6 Bit 0-IPv4 Data 1:4-IP address MS-byte first. The IPv4 address type blocked or unblocked based on the state.
![](/manual_guide/products/dell-powerswitch-s5212fon-s5200on-series-bmc-user-guide-2019-1ed3518/22.png)