Dell PowerSwitch S5212F-ON S5200-ON Series BMC User Guide March 2019 - Page 27
Date 6:11Start time, Data1: Protocol
View all Dell PowerSwitch S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Parameter # Remove the IPv4 port number range with 18 timeout rule Drop all IPv4 or IPv6 with timeout rule 19 Parameter data LS-byte first if little endian system. Twobyte data required to form year. 12-month 13-date 14-hour 15-minute Data 1:-Protocol TCP and UPD 0 = TCP 1 = UDP 2 = both TCP and UDP Data 2:5-port number [2:3]-Port number from the ports blocked or unblocked based on the state. [4:5]-Port number till the ports blocked or unblocked based on the state. Date 6:11Start time [6:7]-Year LS-byte first if little endian system. Twobyte data required to form year. 8-month 9-date 10-hour 11-minute Date 12-17-stop time [12:13]-Year LS-byte first if little endian system. Twobyte data required to form year. 14-month 15-date 16-hour 17-minute Add iptables rules to block IPv4 and IPv6 traffic to the BMC. The state selector is not used. Data1: Protocol Configuration methods 27