Dell PowerSwitch S5212F-ON S5200-ON Series BMC User Guide March 2019 - Page 37
Default configuration Restore, Restore default configuration command, Set backup configuration flag
View all Dell PowerSwitch S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
- NOTE: These request data bytes are required only when you enable either the local or remote system log. 64bytes : Hostname (ASCII) Remote syslog server 4bytes : port number To set the remote server ip address to 10.0.124.22 and port to 770: ipmitool -I lanplus -H xx.xx.xx.xx -U xxx -P xxx raw 0x32 0x68 0x00 0x02 0x31 0x30 0x2e 0x30 0x2e 0x31 0x32 0x34 0x2e 0x32 0x32 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x03 0x00 0x00 ENABLED LOCAL 4bytes : Size (LSB first) size of each file to rotate (file size is from 3 to 65535 KB) 1bytes : Rotate Number of back-up files after logrotate (maximum 1 file) To set the file size to 100 bytes, use the IPMI command: ipmitool -I lanplus -H xx.xx.xx.xx -U xxx -P xxx raw 0x32 0x68 0x00 0x01 0x64 0x00 0x00 0x00 0x01 Default configuration Restore Use configuration restore to start the configuration from scratch. For example, use configuration restore to remove the old configuration and start over if you reinstall the system or move the system to a new location. Restore default configuration command • NetFn-0x32 • Command-0x66 • Response byte 1-Completion code Set backup configuration flag To set the backup flags for the manage BMC confirguration command, use the set backup configuration flag command. • NetFN-0x32 • Command-0xF3 • Request data byte 1:2-Byte 1 is the value specifies to back up a configuration feature or not. - [7]-Reserved - [6]-1b: Backup SNMP. 0b: Do not backup the simple network management protocol (SNMP) - [5]-1b: Backup SYSLOC. 0b: Do not backup SYSLOG - [4]-1b: Backup KVM. 0b: Do not backup keyboard, video, and mouse (KVM) - [3]-1b: Backup NTP. 0b: Do not backup network time protocol (NTP) - [2]-1b: Backup IPMI. 0b: Do not backup IPMI - [1]-1b: Backup NETWORK And SERVICES. 0b: Do not backup NETWORK And SERVICES - [0]-1b: Backup AUTHENTICATION. 0b: Do not backup AUTHENTICATION NOTE: Reserved bits may be updated further based on the requirement. Configuration methods 37