Dell PowerSwitch S5212F-ON S5200-ON Series BMC User Guide March 2019 - Page 34
Remove the IPv6 address rule, blocked or unblocked based on the state.
![]() |
View all Dell PowerSwitch S5212F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Parameter # Add the IPv6 address rule 29 Add the IPv6 address range rule 30 Remove the IPv6 address rule 31 Remove the IPv6 address range rule 32 Add the IPv6 port number rule 33 Add the IPv6 port number range rule 34 34 Configuration methods Parameter data 8-month 9-date 10-hour 11-minute Date 12-17-stop time [12:13]-Year LS-byte first if little endian system. Twobyte data required to form year. 14-month 15-date 16-hour 17-minute Data 1:16-IPv6 address MS-byte first. This is an IPv6 address that is blocked or unblocked based on state. Data 1:16-IPv6 address range [1:16]-Starting IP address from which IPs are blocked or unblocked based on the state. [17.32]-Ending IP address until IPs are blocked or unblocked based on the state. Data 1:16-IPv6 address MS-byte first. This is an IPv6 address that is blocked or unblocked based on state. Data 1:16-IPv6 address range [1:16]-Starting IP address from which IPs are blocked or unblocked based on the state. [17.32]-Ending IP address until IPs are blocked or unblocked based on the state. Data 1-Protocol TCP and UDP 0 = TCP 1 = UDP 2 = both TCP and UDP Data 2:3-port number [2:3]-Port number from the ports blocked or unblocked based on the state. Data 1-Protocol TCP and UDP
![](/manual_guide/products/dell-powerswitch-s5212fon-s5200on-series-bmc-user-guide-2019-1ed3518/34.png)