Dell PowerVault 110T LTO3 User Guide - Page 18

Back to Contents Page Specifications: DellTM PowerVaultTM 110T LTO-3 Tape Drive User's Guide General External Drive Internal Drive NOTE: These specifications are provided by the manufacturer for information purposes only and do not constitute an extension of Dell's warranty to you. Dell's warranty is contained in the documentation for your system. General Manufacturer Model Number Interface Type Manufactured for Dell DELL PowerVault 110T LTO-3 Tape Drive: LTO Internal; LTO External Ultra160 Low Voltage Differential (LVD) SCSI bus External Drive Physical Specifications Width Length Height Weight 24.9 cm (9.8 in) 29.0 cm (11.42 in) 12.5 cm (4.92 in) 6.45 kg (14.2 lb) Power Requirements AC line voltage Line frequency Line current at 100 VAC Line current at 240 VAC 100-240 VAC 50-60 Hz, auto-ranging 0.58 A 0.24 A Performance Interface Recording format Media Capacity Data transfer rate Burst transfer rate Ultra160 LVD SCSI LTO Ultrium Generation 3 LTO Ultrium 400 GB (native) 800 GB (compressed, assuming 2:1 compression) Native 80 MB/sec, at maximum compression 135 MB/sec up to 160 MB/sec Operating Limits Temperature Humidity Maximum wet bulb temperature Maximum altitude 10° to 35°C (50° to 95°F) 20% to 80% relative humidity (noncondensing) 23°C (73.4°F) 3048 m (10,000 ft) Nonoperating Limits (Storage or Shipping) Temperature Humidity Maximum wet bulb temperature -40° to 65°C (-40° to 149°F) 5% to 95% relative humidity (noncondensing) 23°C (73.4°F)