Dell PowerVault 122T LTO Dell PowerVault 122T DLT VS80 Autoloader User's Guide - Page 38

Back to Contents Page Technical Specifications: Dell™ PowerVault™ 122T DLT VS80 Autoloader User's Guide Physical Specifications Autoloader Specifications Autoloader Environmental Specifications Tape Drive Specifications Physical Specifications Characteristic Product Alone Packaged Height 8.4 cm (3.34 in) 20.5 cm (8.0 in) Width 41.9 cm (16.5 in) 60 cm (23.6 in) Depth 60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader) 74.3 cm (29.2 in) Weight 10 kg (22 lb) 11.35 kg (24.9 lb) Autoloader Specifications Characteristic Maximum storage capacity Maximum data transfer rate Drive type Number of slots MSBF Interface Specification Native: 320 GB Compressed: 640 GB (assuming 2:1 compression ratio) Native: 3 MB/s Compressed: 6 MB/s (assuming 2:1 compression ratio) 1 DLT VS80 drive 8 250,000 hours LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector Autoloader Environmental Specifications Characteristic Temperature/humidity Operating Non-operating Recommended operating temperature Temperature shock immunity - maximum rate of change Humidity Operating Non-operating Altitude Operating Non-operating Vibration (5-500 Hz) Maximum acceleration to operating Frequency range Specification 10º to 40ºC (Web bulb temp, 32ºC max) -40º to 65ºC (Web bulb temp, 40ºC max) 20º to 30ºC (Web bulb temp, 30ºC max) 10ºC per hour 20% to 80% RH non-condensing 10% to 95% RH non-condensing 0 to 4000 m 0 to 9144 m 0.25g RMS (random) 500 Hz Tape Drive Specifications DLT VS80 Drive Specifications Description Read/write transfer rate: maximum sustained (DLTtape™IV media) Burst transfer rate Average access time Loading time to BOT (for previously written tape) Unloading time from BOT MTBF Interface type DLT1 (VS80) Non-compressed mode: 3.0 MB/s Compressed (2:1 typical): 6.0 MB/s 20 MB/s 68 seconds 59 seconds (average) 17 seconds (average) >200,000 hours Low-Voltage Differential (LVD) Ultra 2 SCSI