Dell PowerVault 122T LTO Dell PowerVault 122T DLT VS80 Autoloader User's Guide - Page 5

Firmware Revision This option displays the revision of the firmware currently installed in the autoloader. NOTE: The tape drive and autoloader firmware are a single image, but the image may display as three firmware numbers on the front panel: Drive SCSI Controller, Robotics Controller Firmware, and Robotics SCSI Controller Firmware. To use this option, follow these steps: 1. From the Home screen or main menu, press + or - until Information appears on the top line of the LCD screen, and then press Enter to access the available options. 2. Press + or - until Firmware Rev appears on the LCD screen. 3. The LCD screen displays the revision of the firmware currently installed in the autoloader. NOTE: After a firmware update, the firmware revision displayed on the LCD will not be updated until the autoloader is power cycled. 4. Press Cancel when finished. Back to Contents Page