Dell PowerVault 50F Dell PowerVault 56F 16-Port Fibre Channel Switch Inst - Page 44
Ì$&¸
View all Dell PowerVault 50F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
The number displayed represents the number of buffers, from 1 to 16, available to the host. For a complete description of buffer-to-buffer credit, refer to the industry specification "Fibre Channel Physical and Signaling Interface (FC-PH)." Pressing while R_A_TOV is selected displays the Resource Allocation Time Out Value (R_A_TOV). The R_A_TOV is adjustable in 1-second increments using front panel controls, but its value is displayed in milliseconds. This variable works with the variable E_D_TOV to determine the switch's actions when presented with an error condition. Allocated circuit resources with detected errors are not released until the time value has expired. If the condition is resolved prior to timing out, the internal time out clock resets and waits for the next error condition. The range is 1 to 120 seconds. NOTE: The set value must be larger than the set value for the Error Detect Time Out Value. Pressing while E_D_TOV is selected displays the Error Detect Time Out Value (E_D_TOV). The E_D_TOV is adjustable in 1-second increments using the front panel controls, but its value is displayed in milliseconds. NOTE: Use the flashSet command during a Telnet session to set the E_D_TOV or R_A_TOV (in milliseconds) for values other than whole seconds. This timer is used to flag a potential error condition when an expected response is not received (an acknowledgment or reply in response to packet receipt, for example) within the set time limit. If the time for an expected response exceeds the set value, then an error condition is met. The range is 1 to 60 seconds. NOTE: The set value must be less than the set value for the Resource Allocation Time Out Value. 3-10 Installation and Troubleshooting Guide