Dell S300WI User Guide - Page 45
For DLP 3D goggles, you may need to execute 'Invert' to get - dlp projector
UPC - 884116050148
View all Dell S300WI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NOTE: 1. When you want to create 3D experience, you will need a few other components including: a PC/NB with a 120 Hz signal output quad buffered graphics card. b "Active" 3D glasses with DLP Link™. c 3D content. See "Note 4". d 3D Player. (Example: Stereoscopic Player...) 2. Enable the 3D function when it satisfies any of the below-mentioned conditions: a PC/NB with graphics card, capable of outputting at 120 Hz signal via VGA or HDMI cable. b Input a suite of 3D content via Video and S-Video. 3. When projector detects either of the inputs (mentioned above), the enable 3D display on "SETUP" -> "3D Display" OSD works. 4. Current 3D support time is as indicated: a VGA/HDMI 1280 x 720 120 Hz b Composite/S-Video 60 Hz c Component 480i 5. The recommended VGA signal for NB is Single mode output (Dual mode is not recommended) 3D Sync Invert-If you see a discrete or overlapping image while wearing DLP 3D goggles, you may need to execute 'Invert' to get best match of left/right image sequence to get the correct image. (For DLP 3D goggles) Wireless / Network-Select On to activate wireless / network function. Press to configure the Wireless / Network settings. Using Your Projector 45