Dell S300WI User Guide - Page 95
Fault - DC, Lamp module
![]() |
UPC - 884116050148
View all Dell S300WI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Lamp failure Fault - DC supply (+12V) Lamp module connection failed Lamp is defective. Replace the lamp. Power supply has been interrupted. The projector automatically shuts down. Unplug the power cord after three minutes and then turn on the projector. If this problem persists, contact Dell. Lamp module connection may be disrupted. Check the lamp module and ensure that it is properly installed. If the problem persists, contact Dell. OFF AMBER Flashing OFF OFF AMBER AMBER AMBER OFF AMBER Flashing Troubleshooting Your Projector 95
![](/manual_guide/products/dell-s300wi-user-guide-b98ddb5/95.png)
Troubleshooting Your Projector
95
Lamp failure
Lamp is defective. Replace the lamp.
OFF
OFF
AMBER
Fault - DC
supply (+12V)
Power supply has been interrupted. The
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
AMBER
Flashing
AMBER
AMBER
Lamp module
connection
failed
Lamp module connection may be
disrupted. Check the lamp module and
ensure that it is properly installed. If the
problem persists, contact Dell.
OFF
OFF
AMBER
Flashing